Vivo Z5x (2019) Official Firmware
Vivo Z5x smartphone was launched on 24th May 2019. The phone comes with a 6.53-inch touchscreen display with a resolution of 1080x2340 pixels and an aspect ratio of 19.5:9. Vivo Z5x comes with 4GB of RAM. The Vivo Z5x runs Android Pie and is powered by a 5000mAh battery. As far as the cameras are concerned, the Vivo Z5x on the rear packs a 16-megapixel primary camera with an f/1.78 aperture; a second 8-megapixel camera with an f/2.2 aperture and a third 2-megapixel camera with an f/2.4 aperture. The rear camera setup has autofocus. It sports a 16-megapixel camera on the front for selfies, with an f/2 aperture.
Vivo Z5x (2019) Official Firmware
Installation Guidance (How To Install)
Step 1: Download and install the Android USB Driver on your laptop. just in case Android USB Drivers are already put in on your laptop then skip this step.
Step 2: Power Off your Android Smartphone and take away the Battery (if it’s removable).
Step 3: Download the Stock ROM or Custom ROM that you simply need to Flash on your Android Smartphone and extract it on your laptop.
Step 4: Download and Extract Smart Phone Flash Tool on Your laptop. when Extracting you’ll be able to see Some Files.
Step 5: Now Open Flash_tool.exe.
Step 6: Once the Flash Tool is Launched, Click on the Download Tab.
Step 7: within the download Tab, now click on the scatter-loading button.
Step 8: Now, find the Scatter File (you can find the scatter file in the Stock ROM folder).
Step 9: Now, Click on the download button to start Flashing Process.
Step 10: Now, Connect your Smartphone to the pc using USB Cable (without battery- if it’s removable). after connecting the device to the pc Press Volume Down or Volume Up key, so your laptop simply detects your smartphone.
Step 11: Once Flashing is completed, a green Ring will seem.
Step 12: Shut the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the pc.
FIRMWARE DOWNLOAD
Post a Comment